All installation and configuration problems and questions
Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N
by xmerlin » Mon Oct 30, 2006 11:31 am
Hiya guys
We've got a Vicidial system here that we're testing, but it seems to be doing some odd things.
The system is just a simple box with IAX trunking for external call termination and ztdummy for the timing. logging an extesion on to asterisk and calling without vicidial works fine both inbound and outbound.
Manual calling within vicidial seems to be working fine as well, with the exception of the agent screen showing that there are no live calls, even if there are, i think this is just a little bug and its not somethign im going to worry about too much at this stage.
the problem comes when we switch the campain over to ratio mode and log the user out and in again. the sytem is logging the user in properly and calling the softphone as well as dialling out, but it is not putting the call through to the agent, which as you can imagine is a bit of a problem.
If anyone has any ideas where we go from here i would be most appreciative.
-
xmerlin
-
- Posts: 48
- Joined: Thu Oct 12, 2006 2:17 pm
by pchandhu » Mon Oct 30, 2006 11:45 am
what is ur screen -r (post this)
-
pchandhu
-
- Posts: 17
- Joined: Mon Oct 30, 2006 8:28 am
- Location: India/Karnataka/Shimoga
-
by xmerlin » Mon Oct 30, 2006 11:55 am
hi, thanks for the promt reply
im not sure screen is working properly as all im getting is "there is no screen to be resumed"
-
xmerlin
-
- Posts: 48
- Joined: Thu Oct 12, 2006 2:17 pm
by Op3r » Mon Oct 30, 2006 12:51 pm
check your crontab. you can check it by type crontab -l
also if there are crontab entries you can try to restart you server.
Get paid for US outbound Toll Free calls. PM me.
-
Op3r
-
- Posts: 1424
- Joined: Wed Jun 07, 2006 7:53 pm
- Location: Manila
-
by xmerlin » Mon Oct 30, 2006 2:20 pm
crontab seems to be working, but im not getting any output from it and not sure what i should be runnign under it...
i have a feeling that the problem may be something to do with the IAX trunk not announcing the call being connected properly. does that sound possible?
-
xmerlin
-
- Posts: 48
- Joined: Thu Oct 12, 2006 2:17 pm
by Op3r » Mon Oct 30, 2006 3:13 pm
please post the output of crontab -l
and nope thats not possible.
whats on you iax.conf anyway? and also your extensions.conf
Get paid for US outbound Toll Free calls. PM me.
-
Op3r
-
- Posts: 1424
- Joined: Wed Jun 07, 2006 7:53 pm
- Location: Manila
-
by xmerlin » Mon Oct 30, 2006 3:44 pm
i'm at home now and unfortunately it doesnt look like it wants to work at all with a softphone connected over a vpn so i cant post output from crontab until the morning, which i will.
In the meantime, though, i will post my IAX.conf and extesions.conf below (obviously with the trunk details edited)
extensions.conf:
http://pastebin.ca/229632
iax.conf:
http://pastebin.ca/229634
thanks for your help
-
xmerlin
-
- Posts: 48
- Joined: Thu Oct 12, 2006 2:17 pm
by mflorell » Tue Oct 31, 2006 12:36 am
You might want to check that your iax trunk is registered properly in iax.conf.
-
mflorell
- Site Admin
-
- Posts: 18341
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by xmerlin » Tue Oct 31, 2006 2:38 am
i believe it is, as i am able to make and recieve calls via that trunk when bypassing vicidial and dialling out manually and also when dialling out manually using vicidial.
-
xmerlin
-
- Posts: 48
- Joined: Thu Oct 12, 2006 2:17 pm
by xmerlin » Tue Oct 31, 2006 8:53 am
hi, jsut a small update:
crontab -| doesn't give me any output during use of vicidial.
also, the IAX trunk supplier says that permanent registration is not possible on an IAX trunk.
any ideas?
thanks
-
xmerlin
-
- Posts: 48
- Joined: Thu Oct 12, 2006 2:17 pm
by vctor » Tue Oct 31, 2006 2:16 pm
Paste the output from the AST_VDauto dial.pl file here
-
vctor
-
- Posts: 49
- Joined: Tue Jun 13, 2006 9:32 pm
-
Return to Support
Who is online
Users browsing this forum: Bing [Bot], Majestic-12 [Bot] and 48 guests