Configure inbound campaign with extension

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

Configure inbound campaign with extension

Postby llombardi » Wed Nov 28, 2018 7:56 pm

Hello friends,
Your help, I want to set up an inbound campaign using extensions. I have created 3 ingroup that are associated with a campaign. The created DIDs are associated with the ingroup.

Did Extension: 9001, 9002, 9003
Did route: IN_GROUP
Server IP: 10.50.8.24
IN_GROUP ID: Group Entel, Claro, Movistar

Should I add the 9001, 9002 and 9003 to phones in the admin?

VERSION: 2.14-685a
BUILD: 180825-2100
© 2018 ViciDial Group
llombardi
 
Posts: 17
Joined: Thu Sep 13, 2018 6:53 pm

Re: Configure inbound campaign with extension

Postby williamconley » Wed Nov 28, 2018 8:36 pm

Start at page one of the Vicidial Manager's Manual (available free at EFLO.net) and don't skip any of the exercises. Eventually you'll get to the point that you can do this without asking for help. (IF you don't skip anything or jump around, since some of the exercises are interdependent ...)

That being said:

DID and Extension are not related to each other in Vicidial.
* A DID is an inbound phone number, upon which calls arrive.
* An extension is a Phone in Admin->Phones and those have VOIP phones registered to them and are on agents desks.

An inbound call ordinarily works like this:
1) Arrives on a DID ... which
2) Routes to an Ingroup (ONE ingroup, not three) ... which
3) Is "allowed" in any number of Campaigns (The campaigns would need several configuration changes to allow inbound)

So you can have three DIDs which route to three different Ingroups which are all allowed on as many (or few) campaigns as you would like.

For agents to receive calls, they would log in to the campaign AND select those ingroups to receive "blended" inbound and outbound in their phones.

For all of this to work properly, however, you'll want to take my advice and start at page one of the manual. When you get to the end all of this will work. If you hit a road-block, bring us the page/line/version of the manual and your problem (what you expected to happen, what really happened, and the relevent configuration options ... perhaps some debug output) and someone will walk you through to the next step. Many don't hit that snag and it "just works", in which case you could just work through it and get where you need to be without any further delays. Which is why the Manager's Manual exists.

8-) Happy Hunting!
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Configure inbound campaign with extension

Postby llombardi » Mon Dec 17, 2018 6:09 pm

Dear William,
So, should I just use my own line that will be the one for incoming calls?
I had used this:
exten => _9XXX, 1, Answer
exten => _9XXX, 2, Dial (trunkinbound / $ {EXTEN}, tTor)
exten => _9XXX, 3, Hangup

In order to make tests. Your support
llombardi
 
Posts: 17
Joined: Thu Sep 13, 2018 6:53 pm

Re: Configure inbound campaign with extension

Postby williamconley » Wed Dec 19, 2018 4:51 pm

llombardi wrote:should I just use my own line that will be the one for incoming calls?

You have just purchased a car, and you are trying to tie your horses to the front. Stop trying to reinvent this and learn to drive the car.

It's IN the manual. In fact, this is why the manual exists.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20018
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)


Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: No registered users and 49 guests