inbound call problem 2.0.5rc1

[xedlinux]

--- (21 headers 11 lines) ---
Using INVITE request as basis request - a276f010905eadc713c4caa56217960a83746e6a44c1c05d8-0095-6473
Sending to provider : 5060 (NAT)
Found peer 'inbound_provider'
Found RTP audio format 18
Found RTP audio format 0
Found RTP audio format 8
Found RTP audio format 101
Peer audio RTP is at port ip:52570
Found description format telephone-event
Capabilities: us - 0xc (ulaw|alaw), peer - audio=0x10c (ulaw|alaw|g729)/video=0x0 (nothing), combined - 0xc (ulaw|alaw)
Non-codec capabilities: us - 0x1 (telephone-event), peer - 0x1 (telephone-event), combined - 0x1 (telephone-event)
Looking for didnumber in default (domain vicidial ip)
Reliably Transmitting (no NAT) to didprovider_ip:5060:
SIP/2.0 484 Address Incomplete
Via: SIP/2.0/UDP didprovider_ip;branch=z9hG4bK2f8a.7279bc05.0;received=209.216.2.211
Via: SIP/2.0/UDP didprovider_ip;branch=z9hG4bK2f8a.6279bc05.0
Via: SIP/2.0/UDP

[mflorell]

So, where is the VICIDIAL problem in this?

[xedlinux]

HI matt sorry,

the inbound call cannot goes tru...

i modify the did properties to route to:

AGENT
EXTEN
VOICEMAIL
PHONE
INGROUP

but the same things happen.

i guess agi-DID_route.agi is not functioning well....

output of screen -ls..

There are screens on:
2805.ASTsend (Detached)
2817.ASTVDadapt (Detached)
2802.ASTupdate (Detached)
2621.asterisk (Detached)
2814.ASTVDremote (Detached)
2808.ASTlisten (Detached)
2811.ASTVDauto (Detached)
2820.ASTfastlog (Detached)
8 Sockets in /var/run/screen/S-root.

[mflorell]

The DID route AGI functions just fine, your problem is most likely a wrong configuration.

can you post the real Asterisk CLI output of a call coming in?

What context do you have the trunk configured to go to?

[xedlinux]

Hi matt,

it works fine ryt now. its just a router configuration for nat translation that causes the problem.

Thanks a lot.