Voice recording problem

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Voice recording problem

Postby sridhar » Mon Oct 15, 2007 3:50 am

HI ,

I am having strange issue and difficult time -

My PBX is Asterisk1.2 using ztdummy .

I fallowed the scratch Installation , I have problem in Voice recordings (using SIP).

When agent place an outbound call , calls are through but both parties not able to hear each other , I checked the voice recordings , was only receiver voice recorded .

Can anybody help me ?

Thanks

Kind Regards
sridhar
 
Posts: 13
Joined: Mon Oct 15, 2007 3:41 am

Postby sridhar » Mon Oct 15, 2007 5:57 am

Hear is the CLI Log , Please help me this urgent

Manager 'sendcron' logged on from 127.0.0.1
-- Executing MeetMe("Local/8600051@default-e7b7,2", "8600051") in new stack
> Channel Local/8600051@default-e7b7,1 was answered.
-- Executing AGI("Local/8600051@default-e7b7,1", "call_log.agi|0017705793500") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/call_log.agi
-- AGI Script call_log.agi completed, returning 0
-- Executing Dial("Local/8600051@default-e7b7,1", "sip/0017705793500@SIPtrunk|55|o") in new stack
-- Called 0017705793500@SIPtrunk
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing MeetMe("Local/78600051@default-e043,2", "8600051|q") in new stack
> Channel Local/78600051@default-e043,1 was answered.
-- Executing Answer("Local/78600051@default-e043,1", "") in new stack
-- Executing Monitor("Local/78600051@default-e043,1", "wav|20071015-161739_7705793500") in new stack
-- Executing Wait("Local/78600051@default-e043,1", "1") in new stack
-- Executing Hangup("Local/78600051@default-e043,1", "") in new stack
== Spawn extension (default, 8309, 4) exited non-zero on 'Local/78600051@default-e043,1'
-- Executing DeadAGI("Local/78600051@default-e043,1", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing DeadAGI("Local/78600051@default-e043,1", "agi://127.0.0.1:4577/VD_hangup--HVcauses--PRI-----NODEBUG-----16---------------)") in new stack
-- AGI Script agi://127.0.0.1:4577/VD_hangup--HVcause ... ----------) completed, returning 0
== Spawn extension (default, 78600051, 1) exited non-zero on 'Local/78600051@default-e043,2'
-- Executing DeadAGI("Local/78600051@default-e043,2", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing DeadAGI("Local/78600051@default-e043,2", "agi://127.0.0.1:4577/VD_hangup--HVcauses--PRI-----NODEBUG-----0---------------)") in new stack
-- AGI Script agi://127.0.0.1:4577/VD_hangup--HVcause ... ----------) completed, returning 0
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
sridhar
 
Posts: 13
Joined: Mon Oct 15, 2007 3:41 am

Postby ramindia » Mon Oct 15, 2007 10:43 am

Hi

I suggest you

before using vicidial application

Try to call directly from softphone same number

are you able hear voice clearly ?

ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
ramindia
 
Posts: 688
Joined: Wed Oct 11, 2006 4:06 am
Location: India

Postby sridhar » Mon Oct 15, 2007 6:27 pm

HI Ram,

Thanks for your message .

I am able to make a phone calls through softphone and got good voice quality. Even I am able to make phone calls through dialer without voice recordings.

When I use Meetme both parties got no audio but if I look into the recordings I hear the voice from receiver party.

I am not sure as I am using ztdummy and I got Dell poweredge 2900 , I understood , there are some problems with dell server.

I will be very thankful if you can guide me.


Thanks and Kind Regards

Sridhar

ramindia wrote:Hi

I suggest you

before using vicidial application

Try to call directly from softphone same number

are you able hear voice clearly ?

ram
sridhar
 
Posts: 13
Joined: Mon Oct 15, 2007 3:41 am

Postby ramindia » Tue Oct 16, 2007 1:48 am

Hi

the problem you are posting strange

could be some configuration issues or load issue

how many agents ?

waht kind of load and what kind of hard drives you have

ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
ramindia
 
Posts: 688
Joined: Wed Oct 11, 2006 4:06 am
Location: India

Thanks again

Postby sridhar » Tue Oct 16, 2007 2:43 am

HI Ram,

Yes there could be configuration issues but there should not be load issues as I am testing with single agent. I got RAID 5 hard drives and do not have any RAM drive.

If you want I can mail you my configurations.please give me your email address.

Thanks and Regards

Sridhar

ramindia wrote:Hi

the problem you are posting strange

could be some configuration issues or load issue

how many agents ?

waht kind of load and what kind of hard drives you have

ram
sridhar
 
Posts: 13
Joined: Mon Oct 15, 2007 3:41 am

Postby ramindia » Tue Oct 16, 2007 3:09 am

Hi

you need to post the logs

asterisk cli, and channels,
agioutput logs

ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
ramindia
 
Posts: 688
Joined: Wed Oct 11, 2006 4:06 am
Location: India

Postby sridhar » Tue Oct 16, 2007 7:23 am

HI Ram,

I get the fallowing message for Meetme , I have loaded the ztdummy it shows this module successfully.

:51:07 WARNING[20306]: channel.c:2621 ast_request: No channel type registered for 'zap'
Oct 16 17:51:07 WARNING[20306]: app_meetme.c:477 build_conf: Unable to open pseudo channel - trying device


Could you tell me what could be the reason ?

Regards

Sridhar

ramindia wrote:Hi

you need to post the logs

asterisk cli, and channels,
agioutput logs

ram
sridhar
 
Posts: 13
Joined: Mon Oct 15, 2007 3:41 am

Postby ramindia » Tue Oct 16, 2007 9:54 am

Hi

After Scratch_install follow

did you pur the files in rc.local

and rebooted ?

paste

lsmod | grep zt

to see is the driver loaded

ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
ramindia
 
Posts: 688
Joined: Wed Oct 11, 2006 4:06 am
Location: India

Postby sridhar » Tue Oct 16, 2007 10:32 am

Hi Ram here is the output for lsmod:

ind-stpx-02:~# lsmod | grep zt
zttranscode 7656 0
ztdummy 3720 0
zaptel 177380 17 wctdm,zttranscode,wcfxo,wct1xxp,ztdummy
rtc 12372 1 ztdummy
ind-stpx-02:~#


Could you tell me which files I have to put in rc.local ?

Thanks and Regards

Sridhar


Kind Regards

Sridhar

ramindia wrote:Hi

After Scratch_install follow

did you pur the files in rc.local

and rebooted ?

paste

lsmod | grep zt

to see is the driver loaded

ram
sridhar
 
Posts: 13
Joined: Mon Oct 15, 2007 3:41 am

Postby sridhar » Tue Oct 16, 2007 5:40 pm

HI RAM,

First I am very thankful for you help , now I am able to place calls thru dialer and call recording is also okay.I will write my experiences that may help others but not now :) . I have next issue that there is an echo on both side.How to cancel the echo ?

Thanks in advance.

Kind Regards

Sridhar

sridhar wrote:Hi Ram here is the output for lsmod:

ind-stpx-02:~# lsmod | grep zt
zttranscode 7656 0
ztdummy 3720 0
zaptel 177380 17 wctdm,zttranscode,wcfxo,wct1xxp,ztdummy
rtc 12372 1 ztdummy
ind-stpx-02:~#


Could you tell me which files I have to put in rc.local ?

Thanks and Regards

Sridhar


Kind Regards

Sridhar

ramindia wrote:Hi

After Scratch_install follow

did you pur the files in rc.local

and rebooted ?

paste

lsmod | grep zt

to see is the driver loaded

ram
sridhar
 
Posts: 13
Joined: Mon Oct 15, 2007 3:41 am

Postby ramindia » Wed Oct 17, 2007 3:26 am

Hi

the echo is due to your head set
or with the carrier and codec using

get one hardphone or ATA configure and see still you getting the echo


ram
Kindly post your feedback, if this solution works.
so its very usefull for others who join later as a NEWBIE.
ramindia
 
Posts: 688
Joined: Wed Oct 11, 2006 4:06 am
Location: India


Return to Support

Who is online

Users browsing this forum: Google [Bot] and 111 guests