Help on DID

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Help on DID

Postby zhrike » Fri Feb 16, 2018 2:50 pm

Hi,

I am having a problem with my DID configuration. Outbound dialing is fine, it's Inbound that's not working correctly.

Here's the problem. I tried to call my DID using my other sip account. It connects then suddenly ends.

Here is my Carrier Settings
[SIP1010]
disallow=all
allow=ulaw
type=friend
dtmfmode=rfc2833
context=trunkinbound
qualify=yes
insecure=invite
nat=yes
host=sg.sip.commpeak.com
username=XXXXXXXX
secret=XXXXXXXX
allow=alaw

Here's my Entry
exten => _6920542949.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _6920542949.,2,Dial(SIP/${EXTEN:10}@SIP1010,,tTo)
exten => _6920542949.,3,Hangup

I created a DID pointing to my IN_GROUP and that is allowed and being used on my Campaign. Once I logged in to agent interface, I select that Inbound setting. But when I try to call the DID, I get this log

== Using SIP RTP CoS mark 5
-- Executing [18189620828@trunkinbound:1] AGI("SIP/SIP1010-000000b1", "agi-DID_route.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/agi-DID_route.agi
-- <SIP/SIP1010-000000b1>AGI Script agi-DID_route.agi completed, returning 0
-- Executing [99909*1***DID@default:1] Answer("SIP/SIP1010-000000b1", "") in new stack
-- Executing [99909*1***DID@default:2] AGI("SIP/SIP1010-000000b1", "agi-VDAD_ALL_inbound.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDAD_ALL_inbound.agi
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- <SIP/SIP1010-000000b1>AGI Script agi-VDAD_ALL_inbound.agi completed, returning 0
-- Executing [99909*1***DID@default:3] Hangup("SIP/SIP1010-000000b1", "") in new stack
== Spawn extension (default, 99909*1***DID, 3) exited non-zero on 'SIP/SIP1010-000000b1'
-- Executing [h@default:1] AGI("SIP/SIP1010-000000b1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
-- <SIP/SIP1010-000000b1>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0

It connects to my server then the call suddenly ends.

I'm using GoAutodial Asterisk 1.8.23.0-1_centos7.go RPM by demian@goautodial.com built by root @ centos7.goautodial.com on a x86_64 running Linux on 2014-08-01 00:18:09 UTC

Server Specs
2vCPU 4GBRAM
CentOS7

Appreciate all the help!
zhrike
 
Posts: 4
Joined: Fri Feb 16, 2018 12:04 am

Re: Help on DID

Postby zhrike » Sat Feb 17, 2018 5:31 pm

Anybody can help?
zhrike
 
Posts: 4
Joined: Fri Feb 16, 2018 12:04 am

Re: Help on DID

Postby mflorell » Sat Feb 17, 2018 6:07 pm

Post your agiout logfile output for that call.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Help on DID

Postby zhrike » Mon Feb 19, 2018 5:17 pm

Where is that file located? I've searched on this location but found nothing.

Image
zhrike
 
Posts: 4
Joined: Fri Feb 16, 2018 12:04 am

Re: Help on DID

Postby mflorell » Mon Feb 19, 2018 5:51 pm

Looks like you don't have AGI logging enabled on your server. You will need to turn that on in the admin web screen for Modify Server.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Help on DID

Postby zhrike » Mon Feb 19, 2018 6:26 pm

I tried to make an Inbound call but it didn't go through. I set the DID to PHONE 1001 when DID is called.

Image
zhrike
 
Posts: 4
Joined: Fri Feb 16, 2018 12:04 am


Return to Support

Who is online

Users browsing this forum: No registered users and 76 guests