Force Agent Active status

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Force Agent Active status

Postby vicinew » Mon May 29, 2017 3:00 am

Hi all, my VICIDial is VERSION: 2.14-580a BUILD: 161205-1650 is there a feature to force the agent status in active mode after some seconds in DEAD or in DISPO status?
Thx all
vicinew
 
Posts: 36
Joined: Sat Apr 30, 2016 3:32 pm

Re: Force Agent Active status

Postby mflorell » Mon May 29, 2017 7:07 am

There are several related settings, but nothing that will force an agent to active. The reason for this is you could have an agent log in to their screen and leave, then run for hours with agent there. What you are describing would allow the agent screen to run with no interaction from call to call. This is a bad idea.

Here are the related campaign settings that are available as of the current svn/trunk revision:



Dead Call Max Seconds -If this is set to greater than 0, after a customer hangs up and the agent has not clicked on the Hangup Customer button in this number of seconds, the call will automatically be hung up, the status below will be set and the agent will be paused. Default is 0 for disabled.

Dead Call Max Status -If Dead Call Max Seconds is enabled, this is the status set for the call when the agent dead call is not hung up past the number of seconds set above. Default is DCMX.

Dead Call to Dispo Only -If Dead Call Max Seconds is set greater than 0, this option can be enabled if you want to send the agent to the dispo screen after a dead call without automatically dispositioning it. Default is DISABLED.

Dispo Call Max Seconds -If this is set to greater than 0, and the agent has not selected a disposition status in this number of seconds, the call will automatically be set to the status below and the agent will be paused. Default is 0 for disabled.

Dispo Call Max Status -If Dispo Call Max Seconds is enabled, this is the status set for the call when the agent has not selected a status past the number of seconds set above. Default is DISMX.

Agent Pause Max Seconds -If this is set to greater than 0, and the agent has not gone out of PAUSED status in this number of seconds, the agent will automatically be logged out of the agent screen. Default is 0 for disabled.

Agent Ready Max Seconds Logout -If this is set to greater than 0, and the agent has not gone out of READY or CLOSER status in this number of seconds, the agent will automatically be logged out of the agent screen. Default is 0 for disabled.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

Re: Force Agent Active status

Postby vicinew » Mon May 29, 2017 9:31 am

So good...but i can't find Agent Ready Max Seconds Logout. Do you know if is it available in my VICIDial Version? VERSION: 2.14-580a BUILD: 161205-1650
Thx
vicinew
 
Posts: 36
Joined: Sat Apr 30, 2016 3:32 pm

Re: Force Agent Active status

Postby mflorell » Mon May 29, 2017 11:02 am

You will need to upgrade to a newer svn/trunk version to get that feature.
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida


Return to Support

Who is online

Users browsing this forum: No registered users and 88 guests