GUI

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

GUI

Postby JR » Wed Aug 23, 2006 4:22 am

Hi,

We have installed Vici Dialer and are able to access http://10.10.10.10/astguiclient/admin.php (the IP here is just an example), http://10.10.10.10/vicidial/admin.php, and http://10.10.10.10/agc/vicidial.php from the local machine that we have Asterisk and ViciDialer installed on BUT we cannot access them from the net from other computers. We are able to get the first page when we try to access http://10.10.10.10/agc/vicidial.php and when we enter user id, pw and campaign it says INvalid ID. We are not even able to access the first page for the other 2 URLs. Strange thing is that we are able to access them all on our local machine. Please advice where we should look for the problem. We are using Slackware 10.2 with Asterisk, Zaptel and X100P.

We had installed this about a month ago and were able to log in from other computers.

Thanks for your feedback.
JR
 
Posts: 36
Joined: Mon Aug 21, 2006 10:24 pm

Postby mflorell » Wed Aug 23, 2006 5:43 am

What Linux Distro are you using?

How are you able to access the login pages from the server while on the server?

Is your server behind a firewall?

are you trying to access it from computers that are also behind the firewall?
mflorell
Site Admin
 
Posts: 18335
Joined: Wed Jun 07, 2006 2:45 pm
Location: Florida

GUI

Postby JR » Wed Aug 23, 2006 5:52 am

We are using Slackware 10.2.

None of our computers or server is behind a firewall (as far as I know). Is there a way to double check. Also, is there a setting in Slackware that allows remote login?

Its strange that we are able to at least get the log in page when we try to access http://10.10.10.10/agc/vicidial.php and when we enter user id, pw and campaign it says INvalid ID.

For the other 2 - We are not able to access http://10.10.10.10/astguiclient/admin.php (the IP here is just an example), http://10.10.10.10/vicidial/admin.php, and http://10.10.10.10/agc/vicidial.php from the local machine that we have Asterisk and ViciDialer installed on BUT we cannot access them from the net from other computers.
JR
 
Posts: 36
Joined: Mon Aug 21, 2006 10:24 pm

Postby enjay » Wed Aug 23, 2006 12:34 pm

You're not trying to access 10.x.x.x over the internet correct? 10.x.x.x is RFC 1918 address space (non-internet-routable).
enjay
 
Posts: 806
Joined: Mon Jun 19, 2006 12:40 pm
Location: Utah

Postby JR » Wed Aug 23, 2006 3:08 pm

Thanks for your response Matt. I have put 10.x.x.x here instead of our actual static IP here on the forum. We actually put our static iP followed by astguiclient/admin.php, etc and try to access it over the internet but are not able to eventhough we can access these from our local computer/server.

For agc/vicidial.php - its strange that we are able to at least get the log in page when we try to access http://10.10.10.10/agc/vicidial.php and when we enter user id, pw and campaign it says INvalid ID.

If you want to click on the actual link/url and see what we get- I can e-mail it to you.
JR
 
Posts: 36
Joined: Mon Aug 21, 2006 10:24 pm

Postby enjay » Wed Aug 23, 2006 5:25 pm

Please explain your server configuration.

Does it have 2 interfaces? 1 public, 1 private?

Does it only have 1 public interface?

is that interface RFC 1918?

Do you do NAT?

Do you have a Firewall?
enjay
 
Posts: 806
Joined: Mon Jun 19, 2006 12:40 pm
Location: Utah

Postby JR » Wed Aug 23, 2006 8:58 pm

We have only 1 public interface. That is our static public IP.

We are not behind a firwall.

As far as I know - we do NOT do NAT. Is there a way to double check that?

Thanks
JR
 
Posts: 36
Joined: Mon Aug 21, 2006 10:24 pm

Postby enjay » Thu Aug 24, 2006 10:40 am

shoot me a PM with your IP address I will let you knwo if you are NAT'ing
enjay
 
Posts: 806
Joined: Mon Jun 19, 2006 12:40 pm
Location: Utah

Postby Michael_N » Fri Aug 25, 2006 12:57 pm

JR wrote:We have only 1 public interface. That is our static public IP.

We are not behind a firwall.

As far as I know - we do NOT do NAT. Is there a way to double check that?

Thanks


If your server is connected to INTERNET WITHOUT a firewall, it is just a matter of time until someone will find it and hack it.

You must contact someone with knowledge of firewalls who can assist you with protecting your system
Michael_N
 
Posts: 687
Joined: Wed Jul 05, 2006 3:13 pm
Location: sweden


Return to Support

Who is online

Users browsing this forum: No registered users and 61 guests